Mighty Mule 350 Installation Manual download pdf

GTO, Inc. • 3121 Hartsﬁeld Road • Tallahassee, Florida 32303

Telephone (850) 575-0176 • Fax (850) 575-8912 • website www.gtoinc.com

Thank you...

for purchasing the 1500 Dual Gate Operator Connection Kit. GTO, Inc., has been designing and manufacturing

reliable, high quality products since 1987. Our corporate headquarters and state of the art manufacturing facility

is located in Tallahassee, Florida. One of our highest priorities is to provide outstanding technical service to our

customers. Therefore, if you have any questions or require any technical assistance, please call our toll free line

800-543-1236 or 850-575-4144 and ask to speak to one of our technicians.

Prior to installing your 1500 Dual Gate Operator Connection Kit, please read this manual thoroughly. There

are important safety recommendations of which you should be aware. This product, and any accessory you

purchase, should only be installed on a gate opener that meets the current safety standard (UL325). If you have

a gate opener that is not listed with the current standards, please contact the GTO sales department at 800-543-

4283 or 850-575-0176 for consultation on a gate opener that can meet your speciﬁc needs.

Joe Kelley, President of GTO, Inc.

45 foot communication cable and 50 foot power cable

required to connect two PRO-SW1500 automatic

gate operators in dual gate applications.

PRO-SW1500 Dual Gate

Operator Connection Kit

Instructions

Kit Includes:

50’ power cable - to connect the slave operator to the battery.

45’ communication link cable to connect master and slave operators.

50 foot power cable

connects second Mighty

Mule 350 to 12 Volt marine

or automotive type battery.

(run in PVC conduit)

45 foot communication cable allows two

Mighty Mule 350 automatic gate openers to

operate as an integrated dual gate system.

(run in PVC conduit)

PVC conduit

Master Arm Slave Arm

OVERVIEW:

The 50 foot power cable and the 45 foot communication cable must be run under the driveway to connect the

second gate opener to the battery and the ﬁrst gate opener. These cables must be run in PVC conduit and bur-

ied 2 to 4 inches under the surface. It is also advised to bring the conduit up from the ground 18 to 24 inches to

protect them from lawn mowers, weed eaters and grazing animals. Never splice wires.

1 2 3 4 5 6

Summary of Contents

Page 1 - Instructions

Page 2 - POSITION THE OPENERS:

2RED to POSITIVEBLACK to NEGATIVEBattery HarnessConnector0250 Foot Power Cablerun through PVC10 Foot Power CableBattery HarnessConnector02BottomAccess

Page 3 - RERACTED POSITION

3Setting FIRST arm to operate as MASTER arm:1. The MASTER arm should be at the fully retracted position at this time.2. Set DIP switch #1: OFF: pul

Page 4 - LOCK/BEACON

41ON2 3415CHARGINGPOWERSTATUSRFPULL-PUSHMODE1MODE2LOCK/BEACONOFF 120MIN MAXSTALL FORCECLOSE TIMESETLIMITLEARNREMOTEAUX OUTSOLARPANEL18VACRCVRGRNBLKRE

Page 5 - Obstruction setting:

57Setting the open limit (Push to open installation only):1. DIP switch #1 should be in the ON position.2. Turn the ON/OFF switch to the ON position o

Page 6 - Limited One Year Warranty

6Limited One Year WarrantyGTO, Inc. gate opener accessories are warranted by the manufacturer against defects in workmanship for a period of one (1) y