Mighty-mule FM136 User Manual

rev - 09-20-10Crystal clear two-way wireless communication up to 500 feetWireless Gate Entry IntercomThank you for purchasing the Mighty Mule Wireless

rev - 09-20-10The Wireless Intercom/Keypad has two separate units: the KEYPAD and the BASE UNIT. The keypad should be mounted outside the gate allowin

1rev - 09-20-10Keypad Description1. Install BatteriesFour (4) AA batteries (not included) are required to power the keypad. If an external DC power su

2rev - 09-20-10ONALARM ACCESSORY RCVRSEQ1SEQ2LEARNBLUORGWHTGRNR B GConnect #1 wire from the RELAY OUTPUT terminals on the keypad to WHT termi

3rev - 09-20-104. Program the KeypadProgramming Interface/Keypad Operation: • In these instructions, the symbol for the Programming Button is: •

4rev - 09-20-10Base Unit DescriptionGRANT ACCESS Button:Must be pressed before the person at the keypad can press any key to open the gate.Base Unit F

5rev - 09-20-10The base unit can be disconnected from the transformer for use in another location. The battery will last approximately four (4) hours

6rev - 09-20-10base unit is at least 30 feet. 3. Press the “ID SET” button on the keypad until you hear a beep, then release. This erases all stored